Last Modified: 11-29-2007 1.6 A
Service Category: Engine/Hybrid System Section: Engine Control
Model Year: 2008 Model: Sequoia Doc ID: RM000002PQG00JX
Title: 3UR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE V-BANK COVER SUB-ASSEMBLY 3UR-FE INTAKE / EXHAUST: INTAKE MANIFOLD: REMOVAL (2008 Sequoia)+

2. DRAIN ENGINE COOLANT 3UR-FE COOLING: COOLANT: REPLACEMENT (2008 Sequoia)+

3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR



(a) Disconnect the sensor connector.

(b) Using a 19mm deep socket wrench, remove the sensor.

(c) Remove the gasket from the sensor.